02 Toyota Tundra Diagnosis No Start
My 2007 Tundra Tundra stopped on me while driving.
02 toyota tundra diagnosis no start. When I let go of the key when trying to start it it makes a clunk sound like it is releasing the solenoid. Its important to start with the easiest to repair and most likely to be causing your Tundras transmission to slip. Some 2007 2008 model year Tundra vehicles may exhibit a no start condition with Diagnostic Trouble Code DTC B2799 caused by water intrusion into.
Place a jumper wire across TEl and El terminals in engine check connector. There may be no sound a clicking sound or the car may sound like its cranking normally but just failing to catch. Do not start the engine.
Fuel is in one line not two. 2012 Toyota Tundra Truck with 46 Liter V8 was towed in for a no start condition. The second TSB 0220-08 is less common and has to do with water intrusion into the harness.
In a very basic diagnosis you need three things for the engine to start. Check the Fluid Level and Health. Replaced both rear 02s and no errors even running the cheapest gas in town.
Under the drivers side dash panel. Count number of flashes from CHECK ENGINE light. Power to some kind of ECU under body thats some how not letting full power to the pump.
Transmission repair is the most complex and difficult repair for even the most experienced shade tree mechanic. Have 55 volts from this ECU thing to the pump. Last night I went to remote start it and I heard it fire then die the remote start fire it again and it died again.