2000 Toyota Tundra Expansion Valve Replacement

Joined Feb 15 2000.

2000 toyota tundra expansion valve replacement. To access the expansion valve I would first see if you can get to the bolt holding it onto the evaporator core from the drivers side footwell follow the lines from the firewall side under the hood in the cab peel back the foam insulation around the lines. Being more specific the expansion valve adjusts pressure with moving parts and a sensor that measures refrigerants temperature while the orifice tube helps the compressor to adequately adjust the capacity of the pump. The expansion valve is located at the inlet to the AC evaporator core in the dash.

I replaced the AC expansion valve on a 2009 Toyota Camry AC was warm this fixed it. Any rust or remnants of the old paper shims can cause the drum to not sit flat. Make sure the hubs are clean and flat when the drum goes on.

Remove these bolts to pull the cooling lines away from the firewall and remove the evaporator assembly. Let our technician remove and inspect the expansion valve in your 2000 Toyota Tundra to determine the optimum repair procedure. If you are shopping for these products.

I put a vacuum on the system for about 3 hours. When I was charging the system the compressor would. Buy online or call toll free.

Your Toyota Tundra will be happy to know that the search for the right Expansion Valve Orifice Tube products youve been looking for is over. Buy online or call toll free. Toyota engineers should have made it easier to access.

COOLER EXPANSION WITH PACKING. When this process does not run properly the AC may fail and you might require new Toyota Tundra AC expansion valves orifice tubes. If it were on a table where you could get at all the nuts and bolts it would be easy.