2006 Toyota Tundra Brake Fluid Type

FMVSS No116 DOT 3 or SAE J1703 brake fluid.

2006 toyota tundra brake fluid type. Tundra 34 V6 24V 2WD USA VCK30. As a technical note on a hydraulic brake system. OEM fluid prices were 7 for a 12oz bottle you would need at least 3 of those for this job.

Make sure to check the fluid type and prepare the necessary items. Skip to content 15 OFF 100 use code. Previous owner who owned it for most of its life did one of those professional tranny flushes at around around 100K so to my knowledge it had never had a filter and gasket refresh.

2 DOT4 conventional brake fluid used in may European vehicles check cap. Bleeder valve on inboard rears and on the side in the fronts. I looked up the procedure on the 2009 and im assuming our trucks are the same.

You dont have to search for a long time for a particular type of oil or fluid we have gathered the largest selection of automotive chemical products for you to choose from. This will actually be reflected in the brake fluid reservoir as a drop in the fluid level. The manual says that the brake systems should have SAE J1703 or FMVSS No116 DOT 3 fluid.

Discussion in 1st Gen Tundras 2000-2006 started by Pucks18 Apr 29 2020. Corrected the info in my post. Do not shake the fluid before pouring it in your vehicle - the air bubbles will foul up your brake lines.

1 DOT 3 conventional brake fluid used in most vehicles from the factory check cap or owners manual Color clear to amber. Around 27000 two years two months old. Be sure to discard bottles of brake fluid that are over a year old - brake fluid sucks the moisture out of the air and the water vapor in the fluid can quickly rust out the brake lines in your Tundra.